AGI Security GV-JOYSTICK - Manual (Page 10)

GV-Joystick
7
4. GV-Joystick Application
When using the GV-Joystick to control the PTZ cameras, you need to run the following
program in the background. Note that up to 4 GV-Joysticks can be connected, but only one
GV-Joystick can control one PTZ camera at one time.
1. Run mcamctrl.exe from the GV-System folder.
For the users of Center V2 or Control Center, run this program from the Center V2 or
Control Center folders.
Figure 6
2. The Keyboard & Joystick controller dialog box appears.
Figure 7
3. Leave both DVR ID and DVR Name fields blank.
4. In the Startup Type field, select Manual or Automatic to run Keyboard & Joystick
controller at next startup.