Adamson Blueprint AV - Manual (Page 25)

Adamson Systems Engineering | Blueprint Training Module Page 25
Section F:
3D Mode Complex Surface Design
8. Manually enter 40.0 for X and 0.0 for Z of Point 1 to match Extrude to Quad; resulting
surface:
9. Create a new surface; select the Revolve surface type
List of Revolve functionalities
a) Type (Angle or Chords)
b) # Points (Amount of separate surfaces
within revolve)
c) Dir (Direction surface extends from the
X Axis)
d) Angle (Angle of revolve)
e) # Sectors (Amount of individual sectors
comprising revolve surface)
f) Explode (Convert sectors to individual
surfaces)
g) Lock (Radius Lock)
h) Center (X,Y,Z position of revolve center)
i) R (Radius)
j) Link L & R (Linking function for
Extrude)