Adamson Blueprint AV - Manual (Page 24)

Adamson Systems Engineering | Blueprint Training Module Page 24
Section F:
3D Mode Complex Surface Design
6. Extrude; change # of Points to 4; change Dimension to 20; change Direction to <..>
⦁7. Open 2D calculator and input the fol-
lowing data:
⦁ A) Distance 55.0, Angle 4.7°; set to
Point 2
⦁ B) Distance 62.0, Angle 4.16°; set
to Point 3
⦁ Distance 90.0, Angle 8°; set to
Point 4