Zytronic ZXY200 - Manual (Page 22)

Integration Manual - Issue 1 Zytronic Projected Capacitive ZXY200/300 ® Multi Touch Controller & Sensor 22
POWER JACK CONNECTED TO SOCKET ON PCB
Care should be taken when inserting the power jack to avoid damage or lifting of the power socket
connector from the PCB, as shown in Figure 23.
CORRECT AND INCORRECT POWER CABLE INSERTION INTO POWER SOCKET
The USB and power cables should be fixed to the chassis near to the controller PCB, as shown
in Figure 24.
FIGURE 22
FIGURE 23