Zytronic ZXY200 User Manual
Page 13
Integration Manual - Issue 1
Zytronic Projected Capacitive ZXY200/300
®
Multi Touch Controller & Sensor
13
DOUBLE SIDED GASKET PADS MOUNTING OPTION
If gasket pads are used to mount the controller PCB, a separate ground connection from one of the
controller PCB screw holes must be made to the LCD chassis using a low impedance ground cable,
as shown in Figure 10.
LOW IMPEDANCE GROUNDING CABLE
FIGURE 9
FIGURE 10
MINIMUM 5MM GAP
This manual is related to the following products: