Zilog Z16F2810 - Manual (Page 6)

USB Smart Cable
User Manual
UM018114-0513 USB Smart Cable
3
Windows 7 32-Bit and 64-Bit Systems
1. Connect the USB Smart Cable to the host PC. A Windows message
appears, stating Driver Software Installation .
2. Windows automatically searches for the driver. This process can take
a while to complete. However, because there is no option to terminate
this process immediately, Zilog advises waiting for the search to com-
plete. If the driver was previously installed on your system, Windows
automatically installs the USB Smart Cable driver. If this is the case,
skip ahead to Step 8. If the driver was not found, close the Search dia-
log and proceed to Step 3.
3. Go to the Windows Start menu and, in the Search programs and
files field, enter Device Manager . The Windows Device Manager
should appear in the list of returned items in your search; click this
item to launch the Device Manager.
4. A selection labeled Other devices should appear in the list of hard-
ware devices currently running in the Device Manager. Click the
arrow to the left of
Other devices to display these additional devices.
5. Right-click USB Smart Cable to select Update Driver Software ,
which will display the Update Driver Software - USB Smart Cable
dialog.
6. Select the Browse my computer for driver software option in this
dialog, then browse to one of the following driver directories:
32-bit systems:
\device drivers\USB\x32
\device drivers\USB\x32
64-bit systems:
\device drivers\USB\x64
\device drivers\USB\x64