TVLogic LHM-420A - Manual (Page 6)

10 Multi Format LCD Monitor Multi Format LCD Monitor 11
Remote Controller
3. Controls & Functions
●
[POWER] button
- STANDBY On/Off
●
[ENTER] button
- Press the button for less than 2 seconds to
activate the main OSD menu.
- Used to return from sub menu to main menu.
Press the button for more than 2 seconds to
activate Input Select menu.
(SDI, HDMI, DVI, VGA)
- Use the [Up]/[Down] button to change the
Input Signal.
●
[UP] button
- Used to navigate the OSD menu.
●
[DOWN] button
- Used to navigate the OSD menu. Also, used
to activate Auto Adjustment in VGA mode.
●
[MENU] button
- Used to confirm a chosen value (or mode)
when using OSD menu or direct mode
selection.
- When OSD menu is inactivated, press the
button to adjust the value of Brightness,
Contrast, Chroma, Phase, or Aperture.
Remote Controller
3. Controls & Functions