页面 17 – Tview D51TSB User Manual

Page 17

FUNCTION INDEX SIGN

WARNING:

1. In order to ensure the safe operation of the machine in the removing panel,
please wait for five seconds and then fasten panel.
2. To ensure the accurate of touch function, please touch the center point
of relative function.
3. There are build in anti-jamming system in touch screen, To prevent the
wrong position touch, please keep to touch this function for 0.5 second,
then the product will get respond for your instruction.
4. Please do not use the object, which is bigger than the function icon to
touch the screen. Otherwise the touch function will failure or give the
wrong operation to other function.
5. To ensure the panel safety, please don't press or use the sharp object
to touch the panel.
6. Don't play the severity scratch disc, otherwise will damage the DVD
play capability.
7. Be sure to distinguish the anode and the cathode when connecting the
power. If connect wrong, the fuse in filter box will melt immediately to
protect unit. Then please replace the same parameter fuse.
8. DC 12V should be best to connect with the power adapter to prevent
from the over-voltage drop the may influence the normal work of the
monitor.

FM Frequency range

MW Frequency range

S/ N 30db

S/ N Ratio

8 7. 5～10 8. 0M HZ

522～1620KHZ

1 5d Bu

35dBu

50dBu

40dBu

80dBu

Video output scope

Max output power

75Ω

4Ω60W*4CH
1+/-0.2V

≥600

AUDIO

VIDEO

Video Hovizontal
Resolaton

Antenna resistance

Noise limit sensitivity

9. Keep this machine away from too hot, or under effect of moisture, dust
or oil smoke, avoid this machine from dropping or impacting, never
extrude or chafe this machine with sharp objects.
10. Dangerous high voltages are present inside the enclosure. Do not
open the cabinet, non-professionals can not disassemble unit.
11. Installation should be very tight and secure. Preventing the fallen unit
hurt people when moving on or a sudden brake.

Disc Notes.

5. 3"

480xR. G. BX234

5°C ~45°C

Wor king

temperature