Transystem TripMate 850 - Manual (Page 23)

C. (Optional)
-->
Select SPP slave->Next Finish
D. Connect to Serial Port Profile (SPP) Slave
-->
Tap and Hold 850 GPS
: SPP slave, Connect
Done
E. Finish Bluetooth Manager Setup
1. Loading your GPS mapping or routing software
You should have mapping software on your PDA/ Smartphone/ laptop or you need to install it
before using the TripMate850 for navigation.
2. Starting the application
Select the correct COM port & baud rate within the application.
[Note] The Bluetooth device in most of the applications has an “auto-detect” feature so that
you do not need to select the Baud Rate.
22 Rev. 1.2