Thuraya XT User Manual
Page 54

48
03 Using the menu
01
02
03
04
Ɣ
7.2.9 Cost
This service allows you to have cost control of your outgoing
calls. Please note that the actual cost could be different from the
calculated costs. For accurate cost information please refer to
your operator.
Note
Ɣ
The cost control is a function supported by the SIM card.
Some SIM cards may not have this function.
7.2.9.1 Charge rate
You can set the price per minute according to your price plan.
To enter the price you need your PIN2 code included with your SIM
card packagings. Press the left soft key
or the center key
and enter your four-digit SIM PIN2 code to use the corresponding
function.
7.2.9.2 Cost limit
Allow you to set a maximum cost limit. Once this limit is reached no
further calls can be initiated.
Press the left soft key
or the center key
and enter your four
digit SIM PIN2 code to use the corresponding function.
7.2.9.3 Display cost
Choose whether you want to display the cost information upon the
conclusion of calls. Select
On
or
Off
DQGSUHVVWKHOHIWVRIWNH\
or the center key .
You can change the settings of your GmPRS connections.
Ɣ
7.3.1 APN
$FFHVVSRLQWQDPHLVUHTXLUHGZKHQ\RX
connect to the network service provider.
$FFHVVSRLQWQDPHFDQEHFKDQJHGDGGHGRU
deleted.
The default setting is
GET
DQGWKLVDFFHVV
point name can be changed. Other available
Thuraya APNs are GETLC (offering low
compression) and GETHC (offering high compression).
8SWRWKUHHDFFHVVSRLQWQDPHVFDQEHFRQ¿JXUHG6HOHFWRQHWR
use when there is more than one access point name.
Menu
> 7.
Settings
> 3.
GmPRS
> 1.
APN
Ɣ
7.3.2 Auto reject
This function determines whether to reject the incoming call when
GmPRS connection is active.
7RDFWLYDWHWKLVIXQFWLRQVHOHFWWKHFRUUHVSRQGLQJPHQXVHOHFW
On
DQGSUHVVWKHOHIWVRIWNH\
or the center key to
complete the setting.
7.3 GmPRS