Thrustmaster Ferrari Wireless F430 Cockpit - Manual (Page 17)

16/20
PROGRAMMING THE WHEEL AND PEDALS
Your wheel is fully programmable:
- All the action buttons can be switched between themselves.
- All the action buttons can be programmed onto the pedals or gearshift paddles.
TWO PROGRAMMING MODES
The button and the PRESET LED allow you to view the programming type chosen:
AUTOMATIC (pre-programmed) or MANUAL (programmed by yourself). Simply pressing this button allows you
to switch from one programming mode to another (even during a game).
“AUTOMATIC PRESET” (PRESET BUTTON OFF)
This is the default programming.
For more information, refer to the diagrams in CONFIGURING “AUTOMATIC PRESET”
- PLAYSTATION®3 / PC.
“MANUAL PRESET” (PRESET BUTTON ON)
This is your personal programming. The buttons can either be:
- programmed onto the pedals or gearshift paddles
- or switched between each other.
- You can change your programming whenever you want.
- The programming is automatically saved in the wheel (even when it is disconnected or switched off).
- When your “MANUAL PRESET” is blank, it is identical to “AUTOMATIC PRESET”.
PROGRAMMING PROCEDURE
Steps Action LED status
1 Activate “MANUAL PRESET”
by pressing the button. On
2
Press and release the MAPPING button
On
3 Press and release the button to programme.
Flashing
4
Press and release the button, the gearshift paddle or pedal you
want to assign to this function.
Off
On
Your “MANUAL PRESET” programming is now enabled and updated (with your programming applied).