Thrustmaster RGT PRO Extra Pedal - Manual (Page 6)

5/8
When enabled, recentering mode is especially useful in games that do not feature Force Feedback or
which use weak recentering.
• Setting via “Software” (page 2 of the “Control Panel”)
- to disable recentering, click “By the game”.
- to enable recentering, click “By the wheel”.
In this mode, you can adjust recentering intensity from 0 to 100%.
• Setting via “Hardware”
To enable or disable recentering directly in your game, simply press your wheel’s Force button (6). When
enabled, the intensity of recentering corresponds to the percentage selected previously in the “Via the
wheel” setting of the “Control Panel”.
Note :
- When Auto-center is enabled, the LED flashes.
- When Auto-center is disabled, the LED does not flash
FORCE FEEDBACK EFFECTS SETTING (page 2 of the “Control Panel”)
3 settings can be set from 0 to 150 %:
- Master Forces
- Static Forces
- Dynamic Forces
PROGRAMMING THE “GEARBOX” (page 1 of the “Control Panel”)
This function allows you to “separate” (default mode) or “combine” the digital gearshift levers (1) and the
digital gearshift knob (2).
Note :
Always remember to completely close the “Control Panel” before staring your game!
You are now ready to play!
CONNECTOR FOR A SECOND PEDAL SET
You can connect a second pedal set (7) (in addition to the main pedals) at the back of the digital gearshift
knob. Once connected, the second pedal set replaces the 2 analog levers. You can then use the gas,
brake, clutch and handbrake functions directly via the 4 pedals for optimal realism.
The second pedal set is sold separately with an exclusive attachment system.