Thrustmaster Run'N' Drive 3-in-1 Rumble Force - Manual (Page 8)

7/12
PROGRAMMING THE OPTICAL WHEEL AND TRIGGERS
The 2 directions of the optical wheel and the 2 progressive triggers can be programmed using the
MAPPING button (7).
• Examples of possible applications:
Programming a button, direction of a mini-stick or of the D-Pad:
- onto the “up” or “down” direction of the optical wheel
- onto the “right” trigger or “left” trigger
• Programming procedure on optical wheel and triggers:
Steps Action
Color of PRESET
button
1 Enable “MANUAL PRESET” (9) by pressing the button Lit up Green
2 Press and release the MAPPING button (7) Lit up Red
3 Press and release the button or direction to program Flashes Red
4
Raise or lower the direction on the optical wheel
Or press the trigger onto which you wish to place your function
Lit up Green
Your “MANUAL PRESET” is now enabled and up to date
(with your programming applied to the optical wheel or triggers)
SWITCHING BUTTONS/MINI-STICKS/D-PAD
All progressive buttons (on PS2 and PS3) or digital buttons (on PC), as well as directions of the mini-sticks
and of the D-Pad can be switched using the MAPPING button (7).
• Examples of possible applications:
- Switch buttons between themselves
- Switch the 2 mini-sticks
(in this case, you will to have to map the 4 directions of the first mini-stick to the 4 directions of the
second mini-stick)
- Switch the D-Pad with a mini-stick
(in this case, you will have to map the 4 D-Pad directions to the 4 directions of the mini-stick in
question).
• Procedure for switching buttons, mini-sticks and D-Pad
(does not work with the optical wheel and triggers, except for on PC in “7 axes” mode)
Steps Action
Color of PRESET
button
1 Enable “MANUAL PRESET” (9) by pressing the button Lit up Green
2 Press and release the MAPPING button (7) Lit up Red
3 Press and release the button or direction to switch Flashes Red
4
Press and release the button or direction onto which you wish to
place your function
Lit up Green
Your “MANUAL PRESET” is now enabled and up to date (with the 2 functions switched)