Thor 2 mW CATV RF Over Fiber Tx 45-870 MHz - Manual (Page 5)

5
4. Optical signal output: Optical signal output port has two interfaces: FC/APC and SC/APC.
There is invisible laser bean from Fiber output when laser works, which direct shining at eye
will cause permanence burn.
5. Power in
6. Case Earthing: Connection the equipment and earth.
5.3 Display Parameter Explanation
1) Lock is off
2) Lock is on
3) Enter the system
Current Input optic power and output optic power
4) Push ENT key into menu
1. Parameter menu 2.Setting menu 3. Alarm menu
5) Sub-menu of parameter
Push ENT key into menu
Content Function
Laser Output
Laser Bias
Laser Temperature
Tec Cooling
RF Channel Number