Televes High Definition TV Satellite Receiver, zAs HD SAT - Manual (Page 27)

27
EN
Search manual channels
This menu lets you making a search in a given transponder
belonging to a transponder list or add new transponders to
the list of the selected satellite in “Antenna Configuration”.
 Transpond er: Select one of the transponders available
in the receiver.
 Frequency: With the key, delete digits shown and
enter the new frequency for the transponder.
 Polarisation: Indicate whether the search is performed
on the polarity Horizontal, Vertical or both (None).
 Symbol rate: Use the key to delete digits shown and
enter the new symbol rate.
 Network searching: This type of search, the receiver
reads the NIT and list all channels that appear in it.
Update channels list
If you have an updated list of channels and wish to update
the ZAS HD SAT, proceed as follows:
 Copy the list in a memory stick (pen drive) FAT 32 in the
root director y. You can select option “Export channel list
(USB)”.
 Connect the memory stick to the receiver (front USB
connector).
 Select the option “Update channel list” and press OK.
 Choose the file that you want to update on the channel
list and press OK.
 Move the cursor to “YES” and press OK.
 The update may take a few moments. Please wait.
If there are no files avaliable, the message “No channel files
found” will appear.