Recording assistant, High definition dtt adapter – Televes HD DTT Receiver User Manual
Page 26

26
High definition DTT adapter
This menu allows you manage the information available on
the hard drive or pen drive.
- Select the option “Select the option” and press OK.
Next a list showing the files recorded onto the external
hard drive and free space available is shown. SIf the list
occupies more than one page on the screen, use the CH
/CH keys to move down or back page by page.
- Through the
or
keys move through the list of
recordings one by one. The information on each such as
programme name, date of recording and programme
duration will be displayed.
Playing
- Select one of the files from the list and press OK to play.
- If you do not finish watching a recorded file all the way
through, a pop-up window will allow you to select the
option to play it again from the beginning or continue
from the point where the playback was stopped. Select
one of the menu options with the
or
key and press
OK.
- During the playback of a file, the
key allows you to fast
forward through, the
allows enables fast rewind, the
key jumps to the next scene, the
key jumps to
the previous scene, the
pauses the image. Press again
to resume play again.
- If you press OK during playback, a flashing cursor is
displayed on the lower right hand side where you should
enter the time value you wish to skip and press OK again.
This value must be within the total time of the file being
played.
- To stop play at any moment press the or EXIT key.
Other operations that can be carried out in this menu are:
- Format: Press the red button to format the disk or USB
pen. After a warning message select “YES” (OK)
to format, or “NO” (EXIT) to exit without changes.
-
Autoplay: Press the green button to play all files in the
folder.
- Remove: Deletes the selected file from the list.
- Sort: Sequentially pressing the blue button, it changes
the way you display the list, ordered by channel,
Name or Date.
- Press EXIT to exit this menu.
13. Recording Assistant
When performing the action “format”,
if data support (hard disk, pen drive, ...
etc.) contains multiple partitions, they
will disappear, and this support will be
configured as a single FAT 32 partition.
The support should not be greater than
2TB (2 terabytes).