Signamax 10/100 to 100FX Industrial DIN-Rail Mount Компьютерные Аксессуары - Manual (Page 6)

065-1800 series Hardened Media Converter
6 User’s Manual
Toggle Pin 6 to position 0 to disable the link down alarm.
Reconnect the converter to the power supply. The new setting(s) will then take effect.
Front Panel & LEDs
LED Indicators
The LED indicators give you instant feedback on the status of the converter:
LEDs State Indication
Steady Power or ports function abnormally FAULT
Off Power and ports function normally
Steady Power on
PWR stands for POWER
PWR1
PWR2
Off Power off
Steady Connection speed is 100 Mbps 100 (Mbps)
Off Connection speed is 10 Mbps
Steady Link Fault Signaling function enabled LFS
Off Link Fault Signaling function
disabled
Steady A valid network connection
established
LNK stands for LINK
Flashing Transmitting or receiving data
ACT stands for ACTIVITY
LNK/ACT
Off Neither valid network connection
established nor
transmitting/receiving data.
Steady Connection in full duplex mode
FDX stands for FULL-DUPLEX
Flashing Collision occurred
COL stands for COLLISION
FDX/COL
Off Connection in half-duplex mode