Signamax 24-Port 10/100/1000 Unmanaged Switch with Two Dual Media Ports - Manual (Page 4)

电 ⼒线
POW+DATA
DATA
User Guide:
1. Check the switch:
1. Please check the enclosure, the RJ-45 ports, and
the LED indicators, making sure they are ok.
2. Connect the switch to AC power, making sure the
initialization of the PoE switch occurs as below:
• POW indicator is on and remains on after
connection to AC power.
• Other indicators will be on, then off after one
or two seconds.
2. Cable connection:
1. Connect the Switch to a Computer or other device
by Cat. 5e or better cables.
2. Connect the external power cord to the Switch and
the power cord to AC plug.
3. Turn on the switch.
Caution:
1) All operation should be provided only by a qualified
service technician.
2) Please avoid having any heavy thing placed on the
Switch.
3) Do not use this product near water, for example, in
a wet basement or near a swimming pool.
4) Avoid using this product during an electrical storm.
There may be a remote risk of electric shock from
lightning.
5) For outdoor use, the Switch itself should be housed
inside a protective enclosure.
6) Cutting power during a firmware upgrade can
damage your device.
7) Only use attachments/accessories specified by the
manufacturer.
8) Opening the switch or tampering with the warranty
sticker can void your warranty.