Signamax 10/100/1000BaseT/TX to 1000Base SFP PoE/PoE+ Converter User Manual
Page 2
Key Features
Compliant with IEEE 802.3 10BaseT, IEEE 802.3u
100BaseTX, IEEE 802.3 1000BaseT, IEEE 802.3z
1000BaseSX/LX and IEEE 802.3af/at Standards.
1x 10/1001000BaseT/TX Ethernet TP Port and 1x
1000Base SFP Ethernet Fiber Receptacle.
TP port is a PSE port, providing power to a PD device.
(Max. 30W)
TP Port can support Half/Full-Duplex
Auto-MDI/MDI-X and Auto-Negotiation.
Supports Link Fault Signaling (LFS) Function. LFS is
switchable on/off via a side panel-mounted slide
switch.
The 1000Base Fiber Port can support either
Multimode or Singlemode fiber, depending upon the
SFP fiber module selected.
Installation
I. TP port (RJ-45)
The TP port of this converter supports 10BaseT,
100BaseTX, or 1000BaseT, with Auto-Negotiation,
Auto MDI/MDI-X, Flow control and Power over Ethernet
PSE functions. It supports cable lengths of up to 100
meters for Cat 5, 5e or 6 cables.
II. Fiber Port
The fiber port supports multimode or singlemode fiber optic
cables.
III. DIP Switch Setting: (LFS ON/OFF)
Users can have the LFS function turned ON or OFF by a
slide switch at the right side of the converter. The factory
default is LFS OFF.
Connection
Technical Specifications
tandards
IEEE 802.3at PoE+ (PSE
converter)
IEEE 802.3 10BaseT
IEEE 802.3u 100BaseTX
IEEE 802.3ab 1000BaseT
IEEE 802.3z 1000BaseSX/LX
Ports
1 x 10/100/1000BaseT/TX with
RJ-45
Connector and PSE function
1 x 1000Base SFP Fiber Module
Receptacle
Data Transfer
Rate
Gigabit Ethernet:
1000 Mbps/Half-Duplex
2000 Mbps/Full-Duplex
Transmission
Media
10/100/1000BaseT/TX :
Cat. 5e UTP/STP or above, up to
100 m
1000BaseX:
Multimode:
50/125μm or
62.5/125
μm fiber optic cable
Singlemode:
9/125μm or
10/125
μm fiber optic cable
Led
Indicators
RJ45: 100M/Act, 1000M/Act
SFP : Link/Act
System: Power
Power
Supply
(included)
Input: 100 to 240 V AC, 0.8 A
Max.
Output: DC +48 V / 0.83 A
Power
Consumption
6
Watts (Max, converter circuitry
only), plus the PoE/PoE+ power
required to support the
connected PD.
Dimensions
4.02 x 2.96 x 0.91 inches
102 x 75 x 23 mm (L x W x H)
Weight
0.51 lbs.
230 g
Operating
Temperature
32°F to 113°F
0°C to 45°C
Storage
Temperature
-4°F to 194°F
-20°C to 90°C
Humidity
10 to 90% RH (non-condensing)
Certifications
FCC, CE