Signamax 1000BaseT/SX/LX to 1000BaseSX/LX Converters - Manual (Page 3)

Gigabit Ethernet SFP Media Converter
3
The Port Status LEDs
LEDs State Indication
Steady Power on Power
Off No power
Steady TX port: A valid network connection is established.
LNKC stands for LINK/Copper LNKC
Off No connection
Steady FX port: A valid network connection is established.
LNKF stands for LINK/Fiber LNKF
Off No connection
FDX/COL Steady Connection has been made in full duplex mode.
FDX stands for FULL DUPLEX
Steady Receiving data RX
Off No reception
Steady Transmitting data TX
Off No transmission
Functional Description
• DIP switch configuration for Link Fault Signaling enable/disable and
fiber auto/force mode.
• 1000 Mbps, Auto/Full-duplex, Auto-Negotiation, Auto-MDI/MDIX.
• SFP socket for Gigabit fiber optic expansion.
• Full wire-speed forwarding rate.
• 0.8A 12VDC external universal power supply.
• 32
℉ to 113℉ (0℃ to 45℃) operating temperature range.
• Aluminum case.
• Supports wall mounting installations or can be used with the 065-1185
media converter chassis system.