Signamax 10/100/1000BaseT/TX To 1000BaseSX/LX Converters - Manual (Page 8)

Signamax
 Gigabit Ethernet Media Converter
6 User’s Manual
One-Channel Media Converter
Physical Ports
Gigabit Ethernet Media Converter
This converter provides one TX port and one
1000BaseSX/LX/BX port. For the 1000BaseSX/LX/BX port, it
provides options of multimode/singlemode or WDM
multimode/singlemode fiber. For the TX port, it uses RJ-45
connector and supports auto MDIX for uplink purpose.
Port Status LEDs
The LED indicators give you instant feedback on status of the
converter:
Gigabit Ethernet Media Converter with Link Fault Signaling function
LEDs State Indication
PWR
Steady Power on
Off Power off
LFS
Steady
LFS function enabled
LFS stands for Link Fault Signaling
Off LFS function disabled
LNKC
Steady
Copper port: A valid network connection established
LNKC stands for LINK/Copper
Off No connection
Copper Port
10/100/1000
(Mbps)
Steady
Green: Connection at the speed of 1000Mbps
Amber: Connection at the speed of 100Mbps
Off Connection at the speed of 10Mbps
LNKF
Steady
Fiber port: A valid network connection established
LNKF stands for LINK/Fiber
Off No connection
FDX
Steady
Full-duplex mode
FDX stands for Full-duplex
Off Half-duplex mode