Denon AVR 1610 - Manual (Page 34)

3
Get
ting Star
ted
Connections
Pla
ybac
k
Remot
e Contr
ol
Inf
or
mation
Tr
oubleshooting
Specifications
ENGLISH
Making the input settings (Input Setup)
Setting items Setting contents
Input Assign (Component)
Assign input sources to input
connectors.
Component : The DVD HDP TV SAT/CBL VCR DVR V.AUX
input sources are assigned to the component video input connectors as
shown below.
COMP1 (Component video 1 input connector) / COMP2 (Component
video 2 input connector)
None : Do not assign the component video input connectors to the currently
selected input source.
b Upon purchase, the settings of the different input sources are as shown
below.
Input
source
DVD HDP TV SAT/CBL VCR DVR V.AUX
Default
setting
COMP1 None None None None COMP2 None
●
●
iPod Dock
Change the input source to
which the control dock for
iPod is assigned.
The control dock for iPod can be assigned to the DVD SAT/CBL VCR
DVR V.AUX input sources.
Assign : Assign the currently selected input source to the Control Dock for
iPod input.
None
: Do not assign the currently selected input source to the Control Dock
for iPod input.
• With the default settings, the control dock for iPod can be used
connected to the VCR (iPod) connector.
• Even if “iPod Dock” is set to “Assign”, if AVR-1610 and control dock
for iPod are not connected, the input is used as the normal input
source.
Setting items Setting contents
Input Assign (HDMI)
Assign input sources to input
connectors.
HDMI : The DVD HDP TV SAT/CBL VCR DVR V.AUX input
sources are assigned to the HDMI input connectors as shown below.
HDMI1 / HDMI2 / HDMI3
None : Do not assign an HDMI input connector to the currently selected
input source.
b Upon purchase, the settings of the different input sources are as shown
below.
Input
source
DVD HDP TV SAT/CBL VCR DVR V.AUX
Default
setting
HDMI1 HDMI2 None HDMI3 None None None
• When HDMI is assigned to an input source, the audio signal switches
to HDMI along with the video signal. To use with the digital audio
input connectors assigned, set menu “Input Mode” (vpage 32) to
“Digital”.
• When the AVR-1610 and TV are connected with an HDMI cable, if the
TV is not compatible with HDMI audio signal playback, only the video
signals are output to the monitor.
• The audio signals input from the analog, digital and EXT. IN connectors
are not output to the TV.
NOTE
When “HDMI Control” is set to “ON”, HDMI cannot be assigned to “TV”
at the “HDMI” settings (vpage 27).
•
•
Input Assign (Digital)
Assign input sources to input
connectors.
Digital : The DVD HDP TV SAT/CBL VCR DVR V.AUX input
sources are assigned to the digital audio input connectors as shown
below.
C1 (COAXIAL) / O1 (OPT1) / O2 (OPT2)
None ： Do not assign a digital input connector to the currently selected
input source.
b Upon purchase, the settings of the different input sources are as shown
below.
Input source DVD HDP TV SAT/CBL VCR
Default setting None None OPT1 COAXIAL None
Input source DVR V.AUX
Default setting OPT2 None
•
•
Changing the Input Sources Assigned to the Input Connectors
(Assign)
Default settings are underlined.
Set
tings
: Moves the cursor (Up/Down/Left/Right) : Decision the setting : Return to previous menu
Remote control
operation buttons :
Displaying the menu
Cancel the menu