Saturn ST-FP7096 Tigris - Manual (Page 2)

GB
MEAT GRINDER
Dear Buyer!
We congratulate you on having
bought the device under trade name
“Saturn”. We are sure that our
devices will become faithful and re-
liable assistance in your housekeeping.
Avoid
extreme temperature
changes. Rapid temperature
change (e.g. when the unit is
moved from freezing temperature
to a warm room) may cause con-
densation inside the unit and a
malfunction when it is switched
on. In this case leave the unit at
room temperature for at least 1.5
hours before switching it on.If the
unit has been in transit, leave it
indoors for at least 1.5 hours be-
fore starting operation.
Important Safety Instructions
Please keep this instruction manual
in a safe place.
The safety precautions enclosed
herein reduce the risk of fire, elec-
tric shock and injury when correctly
adhered to.
Description
1.Body
2.ON/0/R (ON/OFF/ Reverse)
3.Fasten button
4.Tube inlet
5.Food pusher
6.Hopper plate
7.Head Tube
8. Snake
9. Cutting blade
10.Cutting plate (fine)
11.Cutting plate (medium)
12.Cutting plate (coarse)
13.Fixing ring
14.Sausage
15.Kebbe
IMPORTANT SAFEGUARDS
u Home use only. Do not use for in-
dustrial purpose.
u Unplug when assembling and dis-
assembling the unit.
u Close supervision is necessary
when any appliance is used near
children.
u When carrying the unit be sure to
hold the body with both hands. Do
not carry the unit by the hopper
plate or head.
u Do not fix the cutting blade and
cutting plate when using kebbe at-
tachment.
u Never push products by hand. Use
food pusher.
u Do not grind hard food such as
bones, nuts, etc.
u Do not grind ginger and other ma-
terials with hard fiber.
u Continuous running of meat grind-
er should be not more than 10
minutes with the following
10minutes interval for motor cool-
ing.
u To avoid jamming, do not force to
operate the unit with excessive
pressure.
u When the circuit breaker activates,
do not switch on.
u Never try to replace the parts and
repair the unit by yourself.
FOR THE FIRST TIME
u Check that voltage indicated on the
rating label corresponds the mains
voltage in your home.
u Wash all parts (except body) in
warm soapy water.
u Before plug in, ensure the ON/0/R
switch is in "0" position.
INSTRUCTION FOR USE
ASSEMBLING
u Press the fasten button，hold the
head and insert it into the in-
let(when inserting please pay at-
tention the head must be slanted
as per arrow indicated on the top,
see fig.1),then move the head an-
ticlockwise so that the head being
fastened tightly (fig.2)
u Place the snake into the head, long
end first, and turn to feed the
screw slightly until it is set into the
motor housing (fig.3).
2
3