Specifications – Proceed PDP User Manual

Page 12

Pin 1: Digital ground
Pin 2: DAS (Digital Audio Standard) input +
Pin 3: DAS input –

Specifications

■ Frequency response:

10 Hz - 20 kHz +0dB, -0.2dB

■ Total harmonic distortion (THD):

0.004% @ 1 kHz, 0dB

■ Dynamic range:

104dB (or better)

■ Signal-to-noise ratio:

107dB

■ Channel separation:

120dB

■ Intermodulation distortion (SMPTE IMD):

0.008%

■ Digital-to-analog conversion:

Two precision 20-bit DACs

■ Filtering:

8x oversampling digital filter

Analog filter, linear phase to 40 kHz

■ Low-level linearity:

Deviation unmeasurable to below -70dB,

approximately +1.0dB below -90dB

(undithered, ref 0dB @ 1kHz)

■ Output impedance:

Ω

■ Mains voltage:

120 V U.S. service

■ Mains frequency:

50/60 Hz

■ Power consumption:

25W @ 120V, 60 Hz

■ Shipping weight:

22 lbs/9.98 kg

■ Overall dimensions

■ Width:

8.4 in/214 mm

■ Height:

3.4 in/87 mm

■ Depth:

15.625 in/397 mm

Madrigal Audio Laboratories, Inc., reserves the right to change this
product’s features and specifications without notice.

Pin 1: Chassis ground
Pin 2: Signal + (non-inverted)
Pin 3: Signal – (inverted)

Pin assignments, female

XLR digital input

PUSH

2 1

Pin assignments, male XLR

balanced analog output

This manual is related to the following products:

PDP2 PDP3