Overview – Pinnacle Systems SLT Series User Manual

Page 10

Overview

SLT Series

Specif

Specifica

ica

ications

tions

Emitter and Receiver Pylons

Input Power:

120VAC +/- 10% VAC @ 50-60 Hz, 12 watts max/pylon

24VDC(optional)

Safety Relays

Two force-guided self-checking N.O. relays in series rated at

4 AMPS @ 120VAC

Isolated (DRY) Normally Open contacts. --||--||--

130VAC maximum

Auxiliary Relay

N.O. or N.C.

Output Circuit:

Solid State Output

Two PNP outputs rated at 500mA each. The solid state outputs must

never be placed in series or parallel and are not to be used as the final

switching element(s).

Fuses:

Power: Surface mount replaceable 1A Slow Blow

External Indicators:

Receiver Pylon

1) GREEN = Output Relay contacts closed (OK)

2) RED = Output Relay contacts open (NOT OK)

3) Diagnostics Display (single digit alphanumeric)

Emitter Pylon

RED = Sync channel alignment indicator

(11-1/2” down, viewable only from inside unit)

Construction

Aluminum extrusion with steel end caps, mounting brackets, and replaceable

polycargonate lens. NEMA 4 (without blanking keyswitch).

Temperature Range:

32º to 120º F

Dimensions:

See Dimensional Information

Beam Spacing:

3/4" (19mm)

Minimum Sensitivity
Without Blanking:

1-1/4" (32mm)

Response Time:

< 30 milliseconds (all lengths)

Scanning Frequency:

3.6 Khz