Paxton Superchargers GM 8.1 HD Truck/SUV User Manual

Page 32

11-2

P/N: 4809642
©2004 Paxton Automotive
All Rights Reserved, Intl. Copr. Secured
28SEP04(4809642 v1.2)8.1GMTruck

Attach the prevously routed red wire to the
positive (+) terminal of the fuel pump using
the yellow ring terminal connector.

Fig. 11-c

PAXTON FUEL FILTER FITTING (7P625-031)
(MAKE SURE THAT THE SUPPLIED O-RING IS
INSTALLED AND TIGHTEN THE FITTING)

SUPPLIED FUEL PUMP

PAXTON SUPPLIED FUEL HOSE ROUTE AS
SMOOTHLY AS POSSIBLE, SECURE WITH
ZIP TIES, ATTACH BOTH ENDS TO THE AVAILABLE
BARB FITTINGS AND TIGHTEN THE CLAMPS)

STOCK FUEL LINE DISCONNECT FROM FUEL FILTER AND CONNECT TO FUEL PUMP DISCHARGE

FITTING VERIFY THAT THE FACTORY O-RING IS INSTALLED ON THE END OF THE TUBE (BEND AS

NECESSARY SO THAT THE FUEL PUMP WILL MOUNT EASILY ON THE FRAME RAIL

PAXTON FUEL PUMP FITTING

(7P625-030) (VERIFY THAT THE

COPPER WASHER IS INSTALLED

AND FITTING IS TIGHT)

SUPPLIED FUEL PUMP FITTING

(VERIFY THAT THE COPPER WASHER

IS INSTALLED AND FITTING IS TIGHT)

MARK AND DRILL A HOLE. INSTALL THE SUPPLIED

CLAMP AND SCREW TO HOLD THE FUEL PUMP

STOCK FUEL LINE FROM TANK

STOCK

FUEL

FILTER

Fig. 11-d

SIDE VIEW

BEND UP 90

FUSE TAP MODIFICATIONS

FINISHED MODIFIED

FUSE

IGNITION

RELAY