1 a/c line modification, A/c line modification -1, A/c line modification – Paxton Superchargers GM 8.1 HD Truck/SUV User Manual

Page 19

6-1

P/N: 4809642

28SEP04(4809642 v1.2)8.1GMTruck

Section 6

A/C LINE MODIFICATION

6.1

A/C LINE MODIFICATION

With the refrigerant removed from the A/C
system, remove both ends of the air condi-
tioning line. Note that the straight end con-
nects to the compressor while the bent line
mounts to an A/C connection port located
near the passenger side firewall. (See Fig.
6-a.)

Fig. 6-a

You will need to take the line and re-mount
it back into the vehcle with the ends in the
opposite ports in which they were originally
connected.

***NOTE***

Re-connect the bent end into the A/C com-

pressor first, and it will be necessary to curl

the rubber section of the line toward the inner

fender well and then connect the straight sec-

tion to the upper A/C connection port. Slight

bending of the aluminum sections may be

necessary to obtain the correct hose position-

ing. (See Figs. 6-b, 6-c,) Refer to Fig. 8-a for a

photo of the bent section mounted to the A/C

compressor

TWO ENDS OF THE A/C LINE

TO BE REMOVED