OT Systems FTD110DBMicro - Manual (Page 6)

FT110DBMicro Series Installation & Operation Manual
www.ot-systems.com 6
2.2 Models selection table
Mod
e
Models
1
Descriptions
Installation
requirements
Remarks
S
Ing
le
-M
od
e
FTD110DBMicro-SST Single-mode Data Transceiver Micro
Unit
Horizontally or
vertically
wall-mounted
Micro sized
unit
FT-PA/12V
external
power
supply is
included for
the Micro
unit
2
FTD110DBMicro-SSTL Single-mode Long-haul Data
Transceiver Micro Unit
FTD110DBMicro-SSR Single-mode Data Transceiver Micro
Unit
FTD110DBMicro-SSRL Single-mode Long-haul Data
Transceiver Micro Unit
Mu
lt
i-
Mo
de
FTD110DBMicro-SMT Multi-mode Data Transceiver Micro
Unit
FTD110DBMicro-SMR Multi-mode Data Transceiver Micro
Unit
1 If the optical connector is FC type, the suffix in the model number will be “-FXX”. Eg. FTD110DB-FST
2 FT-PA/12V works under 100 -240VAC, 50/60Hz power supply
(3) Installation
3.1 General
All OT Systems products are thoroughly inspected, tested and securely packaged before
delivery to ensure a stable, intact and trouble-free service. Please check the equipment upon
receipt for any visible damage which may have been caused during shipping.
The FTD110DBMicro Series (Fig. 3.1) can be either horizontally or vertically wall-mounted,
or mounted on any fixture, etc. works with an external power supply FT-PA/12V powered by local
110/220V power.
Fig. 3.1 Micro unit