OT Systems FTD110DBMicro - Manual (Page 5)

FT110DBMicro Series Installation & Operation Manual
www.ot-systems.com 5
(2) Product Overview
2.1 Introduction
The FTD110DBMicro Series products comprise of either single-mode or multi-mode fiber
optic transmitters and receivers for the optical transmission of ONE bi- directional (Tx ↔ Rx) data
signal on one fiber. The products work at wavelengths of 1310nm and 1550nm with either a
9/125um or 62.5/125um fiber for single-mode or multi-mode transmission respectively.
Transparent data transmission is also accomplished in RS232, RS422 and RS485 formats
regardless of the type of communication protocol implemented within the system. Time Division
Multiplex (TDM) technology is employed for digital transmission of forward data; whereas optical
Wavelength Division Multiplex (WDM) technology is employed for simultaneous reverse data
transmission as well as bi-directional data transmission.
For single-mode transmission, we also offer specifically designed products for long-haul
transmissions up to 60km. These models include the letter “L” in the suffix, e.g.
FTD110DBMicro-SSTL for Tx, FTD110DBMicro-SSRL for Rx, etc.
The FTD110DBMicro Series units are available as Micro unit, which can be mounted
horizontally or vertically wall-mounted on any fixture. The Micro unit comes with an external
power supply FT-PA/12V, which can be powered by local 110/220V power.