One Systems OPA-PTB User Manual
Page 2
2
NOTE: The OPA-PTB was designed to be mounted on walls or other structural flat
surfaces ONLY!
The OPALine enclosure and OPA-PTB are for INDOOR use only! DO
NOT USE IN OUTDOOR ENVIRONMENTS!
NO OTHER LOUDSPEAKERS SHOULD BE SUBSTITUTED!
The following actions MUST be performed PRIOR to beginning the installation of the
OPA-PTB and OPALine or OPA-12 enclosure:
1. This installation guide must be completely read and understood.
2. The instruction manual “Rigging and Suspension of On Point Audio
Products” must be read and understood. (This instruction manual is
available along with other technical papers a
3. The structure of the mating surface MUST be capable of supporting the
combined weight of the OPA-PTB bracket, the OPALine or OPA-12
loudspeaker and all associated rigging. It must satisfy the required safety
factors specified by local and national codes, as well as safe rigging
practices. The OPA-PTB weighs 9.7kg (21.4 lbs). The OPALine enclosure
weighs 39kg (86 lbs). The OPA-12 enclosure weighs 33kg (66lbs)
4. The OPA-PTB pan and tilt bracket should be installed only by someone
experienced in the overhead suspension of items. They should be familiar
with applicable local/national codes governing the installation of these types
of products and those governing the attachment of these types of products
to specific structures.
CAUTION: The OPA-PTB bracket and OPALine and OPA-12 enclosures are designed
for INDOOR use and installation ONLY! DO NOT INSTALL IN OUTDOOR
ENVIRONMENTS!