Oklahoma Sound #22 - Manual (Page 2)

O
klahOma
S
Ound
C
OrpOratiOn
intRoduCtion
The model #22 is a versatile and portable table top
lectern, can be used on its own or as a floor lectern
with the optional base sold separately). 3/4" stain and
scratch resistance thermofused melamine laminate
on flakeboard. Paper/book stop included. Assembly
required. 233/4" W x 133/4" H x 197/8" D.
Manufacturers Warranty
Our lectern undergoes the most rigid and exacting tests for superior quality
and performance before leaving the factory. Our lectern is made in America
by American craftsmen. Oklahoma Sound Corporation warrants this prod-
uct to be free from defective material and workmanship for two years from
the date of resale by an authorized Oklahoma Sound distributor. Oklahoma
Sound will replace defective parts and repair malfunctioning products under
this warranty when the defect occurs under normal installation and use,
provided the unit is returned to our factory via prepaid transportation after
direct authorization and approval by Oklahoma Sound. This warranty
provides that examination of the returned product must disclose in our
judgement, a manufacturing defect. This warranty does not extend to any
product which has been subject to misuse, neglect, accident, improper instal-
lation, or where the serial number has been removed or defected and is given
in lieu of any other warranty implied or expressed and will not cover any
consequential damages.
TABLE TOP LECTERN: Model 22
5) Once again go over all the cams and check to make
sure the lectern is sturdy.
Congratulations! You have successfully assembled your
lectern, which if properly cared for should give you long
and satisfactory usage (Diagram F).
Diagram "F"
2 7