Oklahoma Sound #LSS - Manual (Page 4)

4
Step 3:
a) Turn the enƟre base assembly right side over with
panel #A facing up as shown.
b) Be sure to lock the two locking casters before
conƟnuing the assembly of the unit , to prevent
the unit from slipping during asembly.
Step 4:
a) Locate the two part steel column part #C
and make sure it is in the closed (down)
posiƟon as shown.
b) IdenƟfy the adjustable knob part #7 and
thread it into the nut on the side of the col-
umn as shown.
c) Tighten the knob unƟl the inside part of the
column is secured at the closed posiƟon.