Usb configuration, Network configuration – NEXCOM DNA 1150 User Manual
Page 58
Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved.
44
DNA 1150 User Manual
Chapter 4: BIOS Setup
Save & Exit
Advanced
IntelRCSetup
Security
Boot
Main
Version 2.16.1242. Copyright (C) 2013 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
USB Support Parameters
USB Configuration
USB Support
[Enabled]
USB Configuration
USB Support
Enables or disables USB support.
Save & Exit
Advanced
IntelRCSetup
Security
Boot
Main
Version 2.16.1242. Copyright (C) 2013 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Switch all ByPass Mode to
Enable/Disable after power off
Power_ON ByPass Mode
[By Segment]
Segment1 ByPass
[Disabled]
Segment2 ByPass
[Disabled]
Power_OFF ByPass Mode
[By Segment]
Segment1 ByPass
[Disabled]
Segment2 ByPass
[Disabled]
Network Configuration
Power_ON ByPass Mode
Enables or disables the LAN module bypass mode after the system powers on.
Segment1 ByPass and Segment2 ByPass (Power On)
Enables or disables segment 1 and segment bypass after the system powers on.
Power_OFF ByPass Mode
Enables or disables the LAN module bypass mode after the system powers off.
Segment1 ByPass and Segment2 ByPass (Power Off)
Enables or disables segment 1 and segment bypass after the system powers on.