Hardware specifications – NEXCOM VES30-4S User Manual
Page 17
Copyright © 2014 NEXCOM International Co., Ltd. All Rights Reserved.
6
Chapter 1: Product Introduction
VES30-4S and VES30-8S User Manual
Hardware Specifications
Architecture
▪ Switch architecture. Highly integrated, unmanaged-smart gigabit, store
and forward switch
▪ 4K entry MAC address table with automatic learning and aging
Power over Ethernet
▪ PoE standard IEEE 802.3af Power over Ethernet/PSE
▪ PoE power supply type end-span
▪ PoE power output per port 48V DC, 350mA. max. 15.4 watts
Network Connector
▪ 8-port RJ45 for 10/100/1000 base-T. PoE IEEE 802.3af compliance, total 120W
(VES30-8S)
▪ 4-port RJ45 for 10/100/1000 base-T. PoE IEEE 802.3af compliance, total 60W
(VES30-4S)
▪ 1-port RJ45 for 10/100/1000 base-T
Standard Compliance
▪ IEEE 802.3 for 10BaseT Ethernet
▪ IEEE 802.3u for 100BaseT(X) Fast Ethernet
▪ IEEE 802.3ab for 1000BaseT(X) Gigabit Ethernet
▪ IEEE 802.3x for flow control
▪ IEEE 802.3af Power Over Ethernet
I/O Interface
▪ Power: 1x 9~36VDC input with ignition
▪ Ethernet:
8x RJ45 10/100/1000 Mbps PoE port, 802.3af compliance (VES30-8S)
4x RJ45 10/100/1000 Mbps PoE port, 802.3af compliance (VES30-4S)
1x RJ45 10/100/1000 Mbps
▪ LED:
1x power indicator
8x PoE indicator (VES30-8S)
4x PoE indicator (VES30-4S)
1x low voltage protection indicator
Power Management
▪ Selectable boot-up & shut-down voltage for low power protection by DIP
switch
▪ Power on/ off delay time setting by DIP switch
Dimensions
▪ 167 x 58.8 x 139.6 mm (65.75” x 23.14” x 54.96”)
▪ Weight: 1kg
▪ Support Horizontal Mounting, DIN-Rail Mounting (option) and vertical
Mounting (option)
Environment
▪ Operating temperatures: Ambient with air -30°C to 70°C
▪ Storage temperatures: -35°C to 85°C
▪ Relative humidity: 10% to 90% (non-condensing)
▪ Vibration (random): 1g@5~500 Hz
▪ Vibration:
Operating: MIL-STD-810G, Method 514.6, Category 4, common
carrier US highway truck vibration exposure
Non-Operating: MIL-STD-810G, Method 514.6, Category 24, minimum
integrity test
▪ Shock:
Operating: MIL-STD-810G, Method 516.6, Procedure I, functional
shock=20g
Non-Operating: MIL-STD-810G, Method 516.6, Procedure V, crash
hazard shock test=75g
Standards/Certifications
▪ CE approval
▪ FCC Class B
▪ E13 Mark