H/w monitor, System temperature 1 to system temperature 3, Fan1 speed to fan2 speed – NEXCOM NDiS 166 User Manual
Page 67: Vcore to 3.3v
Copyright © 2011 NEXCOM International Co., Ltd. All Rights Reserved.
54
NDiS 166 User Manual
Chapter 4: BIOS Setup
H/W Monitor
This section is used to configure the hardware monitoring events such as
temperature, fan speed and voltages.
Save & Exit
Advanced
Chipset
Boot
Security
Main
Version 2.02.1205. Copyright (C) 2010 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2010 America Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Pc Health Status
System temperaure1
System temperaure2
CPU temperaure
Fan1 Speed
Fan2 Speed
Vcore
12V
5V
3.3V
+21 C
+22 C
+65 C
14062 RPM
N/A
+1.020 V
+11.980 V
+5.000 V
+3.283 V
System Temperature 1 to System Temperature 3
Detects and displays the internal temperature of the system.
Fan1 Speed to Fan2 Speed
Detects and displays the current system fan and CPU fan speed in RPM
(Revolutions Per Minute).
Vcore to 3.3V
Detects and displays the output voltages.