NEXCOM NDiS 166 - Manual (Page 18)

Copyright © 2011 NEXCOM International Co., Ltd. All Rights Reserved. 5 NDiS 166 User Manual
Chapter 1: Product Introduction
Power Supply
▪
Onboard DC to DC
- Power range design: +12V +/-10% DC input
- 4-pin Mini-DIN power jack
- ATX power mode
- Supports wake up alarm
- Supports WOL
- Support power on after failure
- Support soft off
▪
External adapter
- +12V DC output 96W
RTC Battery
▪
On chip RTC with battery back up / One External Li-ion Battery
▪
RTC tolerance less than 2sec (24 hours) under 25°C environment
BIOS
▪
AMI system BIOS
▪
SPI 6416Mbits flash ROM
▪
Support Intel AMT 7.0
System Management
▪
Monitoring
- Super IO built-in function (IT8728F)
- Monitoring of 5 voltages, 3 temperature
4 voltage (For +3.3V, +5V, +12V, Vcore)
3 Temperatures (CPU, two external Temperature Sensor)
Two FAN 3-pin connectors
▪
Watchdog
- Watchdog timeout is programmable by software from 1 second to 255
seconds and from 1 minute to 255 minutes
- Tolerance: 15% under room temperature 25°C
Operating System Support
▪
Microsoft
- XP / Vista / Windows 7 / WES2009 / WES7
Main Board
External I/O
▪
Front I/O
- Two USB 2.0 ports
- Two RS232 COM ports
- Power Button
- One power LED (green)
- One HDD LED (red)
- On/Off switch