Installing the cpu – NEXCOM NDiS 166 User Manual

Page 39

NDiS 166 User Manual

Chapter 3: System Setup

Installing the CPU

1. Loosen the mounting screws that secure the heat sink to the chassis.

▪

Make sure all power cables are unplugged before you install
the CPU.

▪

The CPU socket must not come in contact with anything other
than the CPU. Avoid unnecessary exposure.

Mounting

screw

2. Now remove the heat sink to access the CPU socket.

Bottom Side of the Heat Sink

3. The CPU socket is readily accessible after you have removed the heatsink.

CPU socket

CAUTION!