NEXCOM NEX 981 - Manual (Page 46)

Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. 32 NEX 981 User Manual
Chapter 3: BIOS Setup
CSM
Enables or disables CSM. Enabled to launch the Compatibility Support
Module. Please do not disable unless a WHCK test is running. If Windows
8 64-bit is used and all the devices support UEFI, CSM may be disabled for
faster boot speed.
Launch PXE OpROM Policy
Enables or disables the boot option for legacy network devices.
Launch Storage OpROM Policy
Enables or disables the boot option for legacy storage devices.
Launch Video OpROM Policy
Enables or disables the boot option for legacy video devices.
Compatibility Support Module (CSM) Configuration
This section is used to configure the compatibility support module features.
Advanced
Version 2.15.1234. Copyright (C) 2012 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Option
F1: General Help
F7: Discard Changes
F9: Load UEFI Defaults
F10: Save and Exit
ESC: Exit
Enable to launch the
Compatibility Support Module.
Please do not disable unless
you’re running a WHCK test. If
you are using Windows 8 64-bit
and all of your devices support
UEFI, you may also disable CSM
for faster boot speed.
CSM
Launch PXE OpROM policy
Launch Storage OpROM policy
Launch Video OpROM policy
[Enabled]
[Legacy only]
[Legacy only]
[Legacy only]
Exit Advanced H/W Monitor Boot Security Main
Version 2.15.1234. Copyright (C) 2012 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Option
F1: General Help
F7: Previous Values
F9: Load UEFI Defaults
F10: Save and Exit
ESC: Exit
Set or change the password for
the administrator account.
Only the administrator has
authority to change the settings
in the UEFI Setup Utility. Leave
it blank and press enter to
remove the password.
Supervisor Password
User Password
Supervisor Password
User Password
System Mode state
Secure Boot state
Secure Boot
Not Installed
Not Installed
Setup
Disabled
[Disabled]
Security
Administrator Password
Select this to reconfigure the administrator’s password.
User Password
Select this to reconfigure the user’s password.
Secure Boot
Enables or disables Secure Boot.