NEXCOM NEX 981 - Manual (Page 44)

Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved. 30 NEX 981 User Manual
Chapter 3: BIOS Setup
CHA_FAN1 to CHA_FAN2 Speed
Detects and displays the fan speed of CHA_FAN1 and CHA_FAN2.
Vcore
Detects and displays the Vcore CPU voltage.
+ 3.30V
Detects and displays 3.3V voltage.
+ 5.00V
Detects and displays 5V voltage.
+ 12.00V
Detects and displays 12V voltage.
CPU_FAN1 & 2 Setting
Configures the fan speed of CPU_FAN1 and CPU_FAN2.
CHA_FAN1 & 2 Setting
Configures the fan speed of CHA_FAN1 and CHA_FAN2.
Over Temperature Protection
Enables or disables Over Temperature Protection.
Case Open Feature
Enables or disables the case open detection feature.
H/W Monitor
This section is used to monitor hardware status such as temperature, fan
speed and voltages.
Exit Advanced H/W Monitor Boot Security Main
Version 2.15.1234. Copyright (C) 2012 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Option
F1: General Help
F7: Previous Values
F9: Load UEFI Defaults
F10: Save and Exit
ESC: Exit
Quiet Fan Function Control Hardware Health Event Monitoring
CPU Temperature
M/B Temperature
CPU_FAN1 Speed
CPU_FAN2 Speed
CHA_FAN1 Speed
CHA_FAN2 Speed
Vcore
+ 3.30V
+ 5.00V
+ 12.00V
CPU_FAN1 & 2 Setting
CHA_FAN1 & 2 Setting
Over Temperature Protection
Case Open Feature
: 66 °C
: 34 °C
: 2163 RPM
: N/A
: N/A
: N/A
: +1.776 V
: +3.392 V
: +5.088 V
: +11.932 V
[Full On]
[Full On]
[Disabled]
[Disabled]
CPU Temperature
Detects and displays the current CPU temperature.
M/B Temperature
Detects and displays the current motherboard temperature.
CPU_FAN1 to CPU_FAN2 Speed
Detects and displays the fan speed of CPU_FAN1 and CPU_FAN2.