Boot – NEXCOM NEX 981 User Manual

Page 45

NEX 981 User Manual

Chapter 3: BIOS Setup

Exit

Advanced

H/W Monitor

Boot

Security

Main

→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Option
F1: General Help
F7: Previous Values
F9: Load UEFI Defaults
F10: Save and Exit
ESC: Exit

Fast Boot minimizes your
computer’s boot time. In fast

mode you may not boot from
an USB storage device. Ultra

Fast mode is only supported by
Windows 8 and the VBIOS must
support UEFI GOP if you are
using an external graphics card.

Please notice that Ultra Fast

mode will boot so fast that the
only way to enter

Boot Option Priorities

Fast Boot

Boot From Onboard LAN

Setup Prompt Timeout

Bootup Num-Lock

Boot Beep

Full Screen Logo

CSM(Compatibility Support Module)

[Disabled]

[On]

[Disabled]

Fast Boot
Fast boot minimizes your computer’s boot time. The options are Disabled,
Fast and Ultra Fast. In fast mode you may not boot from an USB storage
device. Ultra Fast mode is only supported by Windows 8 and the VBIOS
must support UEFI GOP if you are using an external graphics card.

Boot From Onboard LAN
Enables or disables Boot From Onboard LAN.

Setup Prompt Timeout
Number of seconds to wait for setup activation key. 65535(0XFFFF) means
indefinite waiting.

Bootup Num-Lock
This allows you to determine the default state of the numeric keypad. By
default, the system boots up with NumLock on wherein the function of
the numeric keypad is the number keys. When set to Off, the function of
the numeric keypad is the arrow keys.

Boot Beep
Enables or disables beep sound during system boot, a buzzer is needed.

Full Screen Logo
Enables or disables the display of OEM logo.

CSM (Compatibility Support Module)
Configuration for CSM, please disable CSM when Fast Boot is enabled.

Boot

This section is used to configure the boot features.

