Cpu configuration – NEXCOM NISE 4000 User Manual

Page 88

NISE 4000 User Manual

Chapter 4: BIOS Setup

Exit

Advanced

Chipset

PCIPnP

Security

Main

Select the ACPI sleep state the
system will enter when the
SUSPEND button is pressed.

ACPI Settings

Enable Hibernation

ACPI Sleep State

Suspend Disabled

S1 only (CPU Stop Clock)

[Enabled]

[S3 only(Suspend to...]

Select the highest ACPI sleep state the system will enter when the suspend
button is pressed. The options are Suspend Disabled, S1 (CPU Stop Clock)
and S3 (Suspend to RAM).

ACPI Sleep State

S3 only (Suspend to RAM)

→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit

CPU Configuration

This section is used to configure the CPU.

Advanced

→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit

Enabled for Windows XP and
Linux (OS optimized for

Hyper-Threading Technology)
and Disabled for other OS (OS

not optimized for
Hyper-Threading Technology).

When Disabled only one thread
per enabled core is enabled.

CPU Configuration

Intel(R) Core(TM) CPU i5-3610ME CPU @ 2.70GHz

CPU Signature

Microcode Patch

CPU Speed

Processor Cores

Intel HT Technology

Intel VT-x Technology

Intel SMX Technology

64-bit

Hyper-threading

Limit CPUID Maximum

Intel Virtualization Technology

306a9

2700 MHz

Supported

[Enabled]

[Disabled]

Hyper Threading

Enables or disables hyper-threading technology.

Limit CPUID Maximum

The CPUID instruction of some newer CPUs will return a value greater

than 3. The default is Disabled because this problem does not exist in the

Windows series operating systems. If you are using an operating system

other than Windows, this problem may occur. To avoid this problem, enable

this field to limit the return value to 3 or lesser than 3.

Intel

Virtualization Technology

Enables or disables Intel

Virtualization technology.