Appendix a: power consumption, Power consumption management – NEXCOM NISE 105 User Manual
Page 75
Copyright © 2013 NEXCOM International Co., Ltd. All Rights Reserved.
62
NISE 105/105A User Manual
Appendix A: Power Consumption
Appendix A: Power Consumption
Power Consumption Management
Purpose
The purpose of the power consumption test is to verify the power dissipation
of system, and the loading of power supply.
Test Equipment
PROVA CM-07 AC/DC CLAMP METER
Device Under Test
DUT: NISE105
CPU: Intel
®
Atom™ processor E3826 dual core, 1.46GHz
Memory: Transcend 4GB DDR3 SODIMM (TS512MSK64W6H)
HDD: SATA2 HDD 2.5 40GB 5400RPM (ST940817SM)
CFast: Transcend CFast 32GB (TS32GCFX500I)
Power Supply: LABORATORY DC POWER SUPPLY GWINSTEK GPC-60300
Add-on Card: MINI PCIE CARD 8790V
CPU Cooler: NISE105CPU HEATSINK SHYUNG SHUHN
System FAN: N/A
Keyboard: Microsoft Wired Keyboard 600
Mouse: Microsoft Basic Optical Mouse
Test Procedure
1. Power up the DUT, boot into Windows 8 x32 Pro
2. Entering standby mode (HDD power down)
3. Measure the power consumption and record it.
4. Run Burn-in test program to apply 100% full loading
5. Measure the power consumption and record it.
Test Data
Sys #1
Sys #1
+12V
+24V
Full-Loading Mode
2.03A
1.11A
Total
24.36W
26.64W
Standby S3Mode
0.93A
0.49A
Total
11.16W
11.76W