NEXCOM NISE 104 - Manual (Page 69)

Copyright © 2012 NEXCOM International Co., Ltd. All Rights Reserved. 55 NISE 104 User Manual
Chapter 4: BIOS Setup
Intel® IGD Configuration
Settings for Intel® IGD.
IGFX – Boot Type
This field is used to configure which video device will be activated during
POST. This has no effect if external graphics present. The options are CRT,
DVI and CRT + HDMI.
Save & Exit Advanced Chipset Boot Security Main
Version 2.14.1219. Copyright (C) 2011 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2011 America Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Select the Video Device
Which will be activated
during POST.
This has no effect if
external graphics present.
Intel IGD Configuration
IGFX - Boot Type
Fixed Graphics Memory Size
[DVI]
[128MB]
IGFX - Boot Type
CRT
DVI
CRT + HDMI
Due to Intel® VBIOS wrong address issue in HDMI mode, there
is no “HDMI” display output option in the BIOS menu.
Please refer to the following table for the display reference
when a HDMI monitor is connected to NISE 104.
Connected Monitor Type BIOS setting
Display output at
POST mode
HDMI only DVI HDMI
HDMI only CRT + HDMI HDMI
HDMI+ DVI via Y cable DVI DVI
HDMI+ VGA via Y cable CRT + HDMI CRT + HDMI
HDMI+ VGA via Y cable VGA VGA