Serial port 2 configuration, Serial port 3 configuration – NEXCOM EBC 355 User Manual
Page 49
Copyright © 2014 NEXCOM International Co., Ltd. All Rights Reserved.
35
EBC 355 User Manual
Chapter 3: BIOS Setup
Serial Port 2 Configuration
This section is used to configure serial port 2.
Serial Port
Enables or disables the serial port.
Onboard Serial Port Mode
Select this to change the serial port mode to RS232, RS422 or RS485.
Advanced
Version 2.16.1242. Copyright (C) 2013 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Enable or Disable Serial Port
(COM)
Serial Port 2 Configuration
Serial Port
Device Settings
Onboard Serial Port Mode
[Enabled]
IO=2F8h; IRQ=3;
[RS232]
Serial Port 3 Configuration
This section is used to configure serial port 3.
Serial Port
Enables or disables the serial port.
Advanced
Version 2.16.1242. Copyright (C) 2013 American Megatrends, Inc.
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
→←: Select Screen
↑↓: Select Item
Enter: Select
+/-: Change Opt.
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC: Exit
Enable or Disable Serial Port
(COM)
Serial Port 3 Configuration
Serial Port
Device Settings
[Enabled]
IO=3E8h; IRQ=11;