Knox Video R & T Cat - Manual (Page 8)

1.2.4 LENGTH FROM t-CAT TO r-CAT
The CAT Video Distribution System was designed to operate in 1 of 4 ranges when correctly set
to the actual length range of the cable interconnecting the t-CAT and r-CAT units (double the
distances for nano-skew).
Short 1 to 75 feet
Medium short 76 to 150 feet
Medium long 151 to 300 feet
Long 301 to 450 feet
1.3 DETAIL SPECIFICATIONS
Video Channels:
Levels:
1V p-p
Frequency Response: DC to 350MHz @ 1v <3dB down at 300MHz
Input Impedance: 75 Ohms
Output Impedance: 75 Ohms
Crosstalk: less than -70dB@5MHz
Connectors:
75Ohm female BNC
Optional RJ-45 female (CAT 5/6/nano-skew cable)
Maximum DC Input:
+/-0.5V
Audio Channels
Audio General Analog
Nominal level:
Analog unbalanced
0 dbu (775 mV)
Analog balanced 0 dbu (775 mV)
Digital (only unbalanced) 0.5 V
Frequency response: 20 Hz to 20 kHz
THD + Noise: 0.05% @ 1 kHz at nominal level
S/N: >80 dB, balanced, at maximum output, unweighted
Crosstalk: <-70 dB @ 1 kHz
Stereo channel separation: >70 dB @ 1 kHz
CMRR for balanced: >65 dB @ 20 Hz to 20 kHz
Max Input Level: +24 dbu
Max Output Level: +24 dbu
Gain: 0db (unity)
Input Impedance:
Balanced
600 Ohms
Unbalanced 4.7K Ohms
Digital switchable 75 Ohms or Hi-Z
Output Impedance:
Balanced
600 Ohms
Unbalanced 100 Ohms
Digital 75 Ohms
Connectors:
Balanced WECO 931-HSL/930-HFL
Unbalanced RCA
Digital RCA
S/PDIF Throughput:
44.1 & 48 ksps stereo (~6Mbaud)