KLING & FREITAG K&F SCENA 15 - Manual (Page 6)

User's manual K&F SCENA 15
KLING & FREITAG GMBH © 2010 Revision 1.0 Page 6 of 18
2.3 Overview�of�Components
1
2
3
4
6
5
7
8
1. Front�grille with a hexagonal hole pattern and acoustic foam behind it.
2. High�frequency�horn, rotatable
3. Pole�mount�flange, covered. For using the monitor on a speaker stand.
4. Handle�rail
5. Plastic�sliders, 4 x on the bottom, 3 x on the side
6. M8�thread�inserts, 4 x, for K&F eyebolt M8, for suspension of the speakers
7. Operating�mode�switch, for selecting the operating modes 1 channel or 2 channel.
8. Speakon�connector, 2 x 4-pin NLT4MP (parallel)
2.4 Required�Tools
To�rotate�the�high�frequency�horn:
• 3 mm Allen key for loosening the front grille
• 4 mm Allen key for loosening the horn tweeter
2.5 Accessories
• K&F eyebolts M8 x 20