KLING & FREITAG K&F SCENA 15 - Manual (Page 11)

User's manual K&F SCENA 15
KLING & FREITAG GMBH © 2010 Revision 1.0 Page 11 of 18
6. Configuration�and�Connecting�Diagram
6.1 1�Channel�Mode
To avoid unnecessarily assigning controller channels, this operating mode is recommended for most
usages.
In 1 channel mode, the high frequency driver and the low/mid-range chassis are controlled by one
controller channel. The internal crossover takes over the frequency separation for tweeter and low/
mid-range.
In 1 channel mode, a maximum sound pressure of 134 dB SPL is reached.
In general, this sound pressure level is fully sufficient for use as a stage monitor.