KLING & FREITAG K&F SONA SUB - Manual (Page 5)

User's manual K&F SONA SUB
KLING & FREITAG GMBH © 2014 Version 2.1 Page 5 of 21
2. Product Description
The subwoofer SONA SUB is the ideal bass supplement for the speaker SONA 5. With its
discreet appearance, it fits in nearly any architecture. The practical mounting points with
a double keyhole design enable wall and ceiling installation. In addition to possible use
with the K&F Controller CD 44, it can also be operated with a universal electronic crossover.
With the option "XO" you can use the SONA SUB without a signal processor too. This
possibilities makes it extremely attractive not only because of its convincing performance but
also economically.
2.1 Scope of Delivery
• A subwoofer for use with the top K&F SONA 5. 3 mounting points based on the keyhole
principle and a fixing hole for horizontal and vertical wall mounting.
• Drilling plan for marking mounting points for wall and ceiling mounting.
• 4-pin Phoenix plug for the corresponding connector in the speaker.
• Plug for fixing hole.
• User's Manual (1x)
2.2 Overview of Components
1
2
3
4
5
6
7
1. Mounting Points in double keyhole design for horizontal and vertical mounting.
2. SPEAKON Connector type NL4 MPR, parallel wiring to Phoenix connector.
3. PHOENIX Connector incl. plug connector, parallel wiring to Speakon connector.
4. Fixing hole with removable stopper. It serves to secure the enclosure after it has been
hung onto the mounting points. During use, the fixing hole must either be closed by the
stopper or a fixing screw. Otherwise, strong interference may occur.
5. Speaker Enclosure
6. Speaker Chassis
7. Front grille, mountable and demountable without tools.