KLING & FREITAG K&F SONA SUB - Manual (Page 16)

User's manual K&F SONA SUB
KLING & FREITAG GMBH © 2014 Version 2.1 Page 16 of 21
6.5 SONA SUB "XO" with SONA 5 or SONA 6
MONO MIX
SONA SUB XO
SONA 5
SONA 6
MONO MIX
MONO MIX
Amplifier
SONA 5
MONO MIX
7. Wiring
Warning
Electrical current of loudspeaker signal may be hazardous for the human body.
Always make sure the connectors secured against touch when the equipment is in use.
When using the Phoenix connector:
To guarantee the protection against contact on the Phoenix connector, you may only use the
provided 4-pin Phoenix plug. This is also the case even if you only use two of the Phoenix
connector’s pins.
Always fully insert bared wire ends into the Phoenix plug such that bared parts of wire can
not be touched.
The bared wire ends have to be accurately screwed into the plugs.
When using the Speakon connector:
The pins 2+ / 2- of the speakon connector are in parallel to the pins 1+ / 1-.
Does not apply to the option "XO": The Phoenix connector is connected in parallel to the
Speakon connector.
To guarantee protection against contact on the Phoenix connector, the provided 4-pin
Phoenix plug must be plugged in during use. This is also the case even if you just use the
Speakon connector. Without the Phoenix plug, the Phoenix connector’s contacts have
hazardous contact voltage!