Unpacking and cleaning – Delta 50-850 User Manual
Page 4
4
UNPACKING AND CLEANING
Carefully unpack the tool and all loose items from the shipping container(s). Remove the protective coating from all
unpainted surfaces. This coating may be removed with a soft cloth moistened with kerosene (do not use acetone, gasoline
or lacquer thinner for this purpose). After cleaning, cover the unpainted surfaces with a good quality household floor paste
wax. ILLUSTRATIONS ARE REPRESENTATIVE ONLY AND MAY NOT DEPICT THE ACTUAL COLOR, LABELING
OR ACCESSORIES AND MAY BE INTENDED TO ILLUSTRATE TECHNIQUE ONLY
Fig. 2
1 - Locking Bands for
Filter and Dust
Collection Bags (2)
2 - Filter Bag
3 - Dust Collection Bag
4 - Filter Bag Support Rod
5 - Extension Rod
6 - Clamps (2)
7 - 6" Dia. Flexible Hose
8 - Drum Support (3)
9 - Casters (3/8"
Lockwashers,
3/8-16 Hex Nuts) (4)
10 - “U” Bracket for Filter Bag
Support Rod
11 - Lower Dust Bag
retaining Clips (4)
Fig. 3
12 - Blower and Motor
Assembly
13 - Clamp
14 - 4" Dia. Flexible Hose
15 - Intake Port
16 - Base
17 - Intake Caps (2)
18 - Drum
Fig. 2
Fig. 3
1
2
3
4
5
6
7
8
9
10
12
13
14
15
16
17
18
11
HARDWARE NOT SHOWN
*
- 5/16"-18 x 5/8"
Hex Head Screws (20)
*
- 5/16" Lockwashers (24)
*
- 5/16"-18 Hex Nuts (12)
*
- 5/16" x 7/8" O.D.
Flat Washers (6)
*
- M4.2 Sheet Metal
Screws (4)
*
- 1/4-20x5/8" Hex Head
Screws (8)
*
- 1/4" Lockwashers (8)
*
- 1/4"-20 Hex Nuts (8)